The IVG Pro 2 Battery Device is a rechargeable, refillable pod device designed to work with the IVG Pro refill pod system, also known as IVG Pro 12 refill pods. It is a reusable alternative to single-use vapes and remains fully legal to buy and use in the UK.
Each refill pack combines:
- 1 x 2ml prefilled pod
- 1 x 10ml refill container
Together these create a 12ml prefilled system that can deliver up to 10,000 puffs of nicotine salt e-liquid, automatically feeding the pod as you vape. Unlike disposable vapes, the IVG Pro system lets you replace the pod while keeping the same IVG Pro battery, so you cut down on waste and cost.
This guide covers everything: how to set up the IVG Pro 2, how the auto-refill works, how to remove and change pods, how to unlock the device, IVG Pro battery replacement, and how to fix common faults. It is updated for 2026.
Is the IVG Pro Legal Under the UK Disposable Vape Ban?
Yes. Since 1 June 2025, single-use disposable vapes have been banned across the UK, and the Tobacco and Vapes Act continues to tighten the rules around vaping products. The ban applies to disposables that cannot be recharged and refilled.
The IVG Pro 2 is a rechargeable device with replaceable pods, so it sits outside the disposable ban and is a legal, TPD-compliant option. Because the battery is reused and only the pod is swapped, it meets the reusable requirements that banned disposables did not.
If you are moving away from single-use devices, it helps to understand the wider picture. Read more about whether disposable vapes are being banned in the UK, how big puff vapes fit around the disposable ban, and our comparison of pod kits versus disposables to see which suits you.
IVG Pro 2 Specifications
Here are the key specs for the IVG Pro 2 battery device and its refill pod system at a glance.
| Feature | Detail |
|---|---|
| Battery capacity | 1000mAh (integrated, rechargeable) |
| Charging | USB-C |
| Pod capacity | 2ml prefilled pod + 10ml refill container (12ml total) |
| Puff count | Up to 10,000 puffs (varies with usage) |
| E-liquid type | Nicotine salt |
| Nicotine strengths | 0mg, 10mg and 20mg (within the UK 20mg/ml legal cap) |
| Coil | Integrated mesh coil |
| Flavour range | Multiple flavours across the IVG Pro 12 pod range |
The 0mg, 10mg and 20mg strengths mean you can choose the right nicotine strength for your needs, whether you are a heavier smoker moving across or stepping down over time. The 20mg option sits at the maximum strength permitted under UK law.
What Are IVG Pro Refill Pods?
IVG Pro refill pods, also known as IVG Pro 12 refill pods, are the official pod packs designed for the IVG Pro battery device range, including the IVG Pro 2.
Each pack includes:
- A 2ml prefilled vape pod (TPD compliant)
- A 10ml refill container
- Nicotine salt e-liquid
- An integrated mesh coil
The refill container automatically supplies e-liquid to the pod as you vape. Because the pod and container together hold 12ml of e-liquid, the system can deliver up to 10,000 puffs depending on how you use it.
Do You Manually Refill IVG Pro Pods?
No. This is an important point that trips a lot of people up. The IVG Pro is not a manual refill kit, so you do not top up the pod with a bottle of e-liquid the way you would with a refillable tank.
Instead, the sealed 10ml refill container clicks onto the 2ml pod and auto-feeds liquid into it as the level drops. So when people search for “how to refill IVG Pro pods” or “how to refill IVG Pro with juice”, the honest answer is that you do not add juice yourself at all. You simply attach the prefilled container to the pod and the system handles the rest.
If you prefer a traditional refillable setup where you add your own e-liquid, our guide to vape pods versus tanks explains the differences.
IVG Pro 2 Instructions (Step-by-Step Setup)
Setting up the IVG Pro 2 battery device takes less than a minute.
Step 1 – Line Up the Pod and Refill Container
Each IVG Pro refill pack contains a 2ml vape pod and a 10ml refill container. Remove all protective seals and rubber stoppers from both parts before connecting them. Then align the pod with the refill container connectors so the pieces match correctly.
Step 2 – Push the Pod and Refill Container Together
Once aligned, push the two pieces together firmly until they click. This activates the IVG Pro automatic refill system, allowing e-liquid to flow from the container into the pod as you use it.
Step 3 – Insert the Pod Into the IVG Pro 2 Battery Device
Insert the connected pod unit into the top of the IVG Pro 2 battery device and push down gently until it sits securely. Once installed, simply inhale from the mouthpiece to start vaping. The device fires automatically when you draw.
How to Prime a New IVG Pro Pod
Priming stops that harsh dry hit on first use. Because the mesh coil needs to be fully saturated before you power through it, follow these steps with a brand new IVG Pro pod:
- Connect the pod to the refill container and click it into the device as above.
- Leave the assembled pod to stand upright for 5 to 10 minutes so liquid soaks into the coil.
- Take 3 to 4 gentle, short draws without inhaling to pull liquid through the coil.
- Begin vaping normally once the flavour comes through fully.
Rushing this is the most common cause of a burnt first puff. For more on this, see our guide to how to avoid dry hits when vaping.
How the IVG Pro Refill System Works
The IVG Pro uses a gravity-fed auto-feed design. As you vape:
- The 2ml pod supplies e-liquid to the mesh coil.
- When the pod level drops, e-liquid flows in from the 10ml refill container.
- The pod tops itself back up automatically.
This gives you consistent flavour delivery, stable vapour production and fewer dry hits, without ever needing to add liquid by hand.
How to Remove an IVG Pro Pod
Removing a used or empty pod is quick:
- Hold the IVG Pro 2 battery device upright.
- Grip the pod unit at the mouthpiece end.
- Pull the pod straight up and out of the top of the device with a firm, even motion.
- Set the empty pod and refill container aside for recycling.
Do not twist or force the pod at an angle, as this can bend the connectors. Please dispose of used pods responsibly, our guide on how to dispose of and recycle vapes shows you how.
How to Replace or Change an IVG Pro Pod
To change your IVG Pro pod, you combine removal with fitting a fresh one:
- Remove the old pod by pulling it straight up and out (see above).
- Take a new IVG Pro 12 refill pod and its 10ml container.
- Peel off all seals and stoppers, then click the pod and container together.
- Insert the new pod unit into the top of the device until it seats securely.
- Prime it for a few minutes, then take a couple of gentle draws before vaping normally.
You should change your pod when the refill container runs empty or when the flavour turns weak or slightly burnt.
How to Unlock the IVG Pro 2
Some IVG Pro 2 devices include a simple lock function to prevent accidental firing in a pocket or bag. If your device seems unresponsive but still has charge, it may be locked rather than faulty.
On devices with this feature, the lock is typically toggled by pressing the fire or function button five times in quick succession. The display or LED will usually indicate the change from locked to unlocked. Because feature sets can vary between batches, always check the leaflet that came with your specific device to confirm the exact unlock method.
If your IVG Pro 2 does not respond after unlocking and charging, move on to the troubleshooting section below.
IVG Pro Battery Replacement
The IVG Pro 2 uses an integrated 1000mAh battery that is not user-replaceable. You do not open the device to swap in a new cell. Instead, you recharge it via USB-C and, when the battery eventually degrades over its lifespan, you replace the whole battery device while continuing to use the same style of IVG Pro pods.
To keep your IVG battery healthy for as long as possible:
- Recharge before the battery fully drains rather than running it flat every time.
- Use a suitable USB-C charger and avoid overheating the device.
- Store it somewhere cool and dry.
For more detail, see our vape battery safety guide and our tips on how to extend vape battery life. It is worth being clear on the distinction: replacing the pod is routine and frequent, while replacing the battery device only happens once the integrated cell no longer holds a decent charge.
IVG Pro 2 Battery Device vs Disposable Vapes
Many vapers choose the IVG Pro 2 as their replacement now that disposables are banned.
| IVG Pro System | Banned Disposable Vape |
|---|---|
| Rechargeable battery device | Single-use device |
| Replaceable refill pods | Entire device discarded |
| Up to 10,000 puffs | Around 600 puffs |
| Reduced waste | High waste |
| Legal in the UK | Banned since 1 June 2025 |
Because only the pod is replaced, the IVG Pro system produces significantly less waste while keeping the convenience many people liked about disposables.
Common IVG Pro 2 Problems and Fixes
If your IVG Pro 2 battery device is not working, blinking or not producing vapour, the issue is usually pod installation, a locked device, or battery charge.
IVG Pro 2 Not Working
- Check the device is unlocked (five clicks on the button on supported models).
- Ensure the pod and refill container are fully connected.
- Reinsert the pod firmly.
- Charge the battery via USB-C.
IVG Pro Pod Not Connecting
- Remove all seals and stoppers.
- Make sure the pod and container click together properly.
- Reinsert the pod into the device.
Weak or Burnt Flavour
- Prime a new pod and take a few gentle draws to let it fill.
- Check the refill container is supplying liquid.
- Replace the pod if the container is empty or the flavour stays burnt.
Device Blinking
- Charge the battery.
- Reinstall the pod securely.
When Should You Replace IVG Pro Refill Pods?
Replace your refill pod when:
- The 10ml refill container is empty.
- The flavour becomes weak or burnt.
- Vapour production noticeably drops.
Frequently Asked Questions
How many puffs does the IVG Pro system provide?
Up to 10,000 puffs, depending on how you vape.
Do IVG Pro refill pods refill automatically?
Yes. The 10ml container automatically feeds the 2ml pod, so there is no manual filling with bottled juice.
How do I refill IVG Pro pods with juice?
You do not. The IVG Pro is not a manual refill kit. You click a sealed prefilled container onto the pod and it auto-feeds liquid for you.
How do I unlock the IVG Pro 2?
On models with a lock function, press the fire or function button five times quickly. Check your device leaflet to confirm, as features vary by batch.
Can I replace the IVG Pro 2 battery?
No, the 1000mAh battery is integrated and not user-replaceable. You recharge it via USB-C and replace the whole device once the battery degrades.
What nicotine strengths does the IVG Pro come in?
Pods are available in 0mg, 10mg and 20mg, with 20mg being the maximum allowed under UK law.
Final Thoughts (Updated for 2026)
With disposables now banned, the IVG Pro 2 battery device is a straightforward, long-lasting and legal way to keep vaping in the UK. Its auto-feed 12ml pod system delivers up to 10,000 puffs, primes easily, and swaps pods in seconds, while the reusable IVG battery cuts down on waste compared with single-use vapes.
Choose from 0mg, 10mg or 20mg nicotine salt options, prime each new pod to avoid dry hits, and replace the whole device only when the battery finally tires. For a fuller overview, our pod kits versus disposables guide can help you decide if the IVG Pro is the right fit for you.
