OXVA XLIM Pro 4 Pod Vape Kit

OXVA XLIM Pro 4 Pod Vape Kit

The OXVA XLIM Pro 4 Pod Vape Kit is a rechargeable, refillable pod system featuring a built-in 1800mAh battery, adjustable 5-30W output and OXVA’s Anti-Burn Tech (ABT). Its smart liquid-level detection helps prevent dry hits by cutting power when the e-liquid in an ABT cartridge gets too low.

Designed for mouth-to-lung (MTL) and restricted direct-to-lung (RDL) vaping, the XLIM Pro 4 combines adjustable airflow, inhale and button activation, and a 0.98-inch HD colour screen. It includes two top-fill UniTech 3.0 ABT mesh pods: a 0.6Ω cartridge and a 0.8Ω cartridge.

Product Highlights

• ABT liquid-level detection helps prevent low-liquid dry hits
• Built-in 1800mAh battery with up to 3A USB-C charging
• Adjustable 5-30W output and side airflow control
• 0.98-inch HD colour screen with charging countdown and ECO Mode
• Includes 0.6Ω and 0.8Ω UniTech 3.0 ABT mesh pods

How Does OXVA Anti-Burn Tech Work?

OXVA’s ABT system monitors the e-liquid level inside an XLIM ABT cartridge. When the liquid becomes too low, the device displays a refill alert and stops output to help prevent the coil from firing dry.

Anti-burn protection requires an XLIM ABT cartridge and the ABT function to be enabled. Standard compatible XLIM pods work in the device without this protection.

ABT does not prevent normal coil wear. If a filled pod develops a persistent burnt taste or noticeably weaker flavour, replace the cartridge.

1800mAh Battery and 3A USB-C Charging

The built-in 1800mAh battery charges through USB-C at up to 5V/3A with a suitable adapter and cable. A charging countdown on the screen lets you check progress.

ECO Mode reduces screen power consumption to help conserve the remaining charge. Actual battery life depends on your wattage, pod resistance and vaping habits.

Adjustable Wattage, Airflow and Activation

The XLIM Pro 4 offers adjustable output from 5W to 30W. Match the wattage to the range printed on your fitted pod, then adjust the side airflow slider to change the draw.

A more closed airflow provides a tighter inhale, while opening the slider gives a looser draw. Activate the device by inhaling through the mouthpiece or pressing and holding the firing button.

The HD colour display shows information including battery level, wattage and puff count, with selectable display themes.

XLIM Pro 4 Pod Options and Recommended Wattage

The kit includes two XLIM ABT UniTech 3.0 pods with integrated mesh coils.

Pod resistance	Recommended wattage	Draw	Included?
0.4Ω	26-30W	RDL	No
0.6Ω	20-25W	MTL / RDL	Yes - pre-installed
0.8Ω	12-16W	MTL	Yes
1.2Ω	10-12W	MTL	No

The 0.8Ω pod operates at lower wattage and suits MTL vaping. The 0.6Ω pod runs at higher wattage and suits a warmer draw with more open airflow.

OXVA lists these cartridges as suitable for nicotine salt and freebase e-liquids. E-liquid is sold separately.

Replacement Pod Compatibility

The XLIM Pro 4 accepts XLIM ABT cartridges and standard compatible XLIM top-fill cartridges.

Cartridge type	Works with the Pro 4?	ABT protection
XLIM ABT UniTech 3.0, including XL versions	Yes	Yes - when enabled
Standard XLIM UniTech 3.0 top-fill	Yes	No
Standard XLIM V3 top-fill	Yes	No

Choose our OXVA XLIM ABT Replacement Pods to retain the Pro 4’s anti-burn protection. These XL cartridges come in packs of three, with 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω resistance options.

Our standard OXVA XLIM UniTech 3.0 Replacement Pods also fit, but operate without ABT protection.

Browse our OXVA range for more devices and replacement pods.

How to Fill and Set Up the XLIM Pro 4

1. Open the pod’s filling seal and add e-liquid through the filling port.
2. Close the seal securely.
3. Allow the wick to saturate fully. OXVA quotes approximately 30 seconds of priming for UniTech 3.0 cartridges.
4. Fit the pod securely and switch on the device.
5. Set the wattage within the pod’s recommended range and adjust the airflow.
6. Inhale through the mouthpiece or use the firing button.

Refill when prompted and avoid using a dry cartridge.

Button Controls

Button presses	Function
2 clicks	Open the menu
3 clicks	Adjust wattage
4 clicks	Lock or unlock the button
5 clicks	Switch the device on or off
8 clicks with an ABT pod fitted	Switch ABT protection on or off

OXVA XLIM Pro 4 vs XLIM Pro 3

Feature	XLIM Pro 4	XLIM Pro 3
Battery capacity	1800mAh	1500mAh
Charging input	5V/3A USB-C	5V/2A USB-C
Adjustable output	5-30W	5-30W
Screen	0.98-inch HD colour	1.05-inch HD colour
ABT liquid-level protection	Yes, with ABT cartridges	No

The Pro 4 adds ABT liquid-level protection, a larger battery and a higher maximum charging input. Maximum output remains 30W, and its screen is slightly smaller than the Pro 3’s.

Colours

The OXVA XLIM Pro 4 Pod Vape Kit is available in ten colours and finishes:

• Black Carbon
• Cocoa Black Leather
• Flowing Dark Blue
• Flowing Ice Blue
• Flowing Midnight
• Flowing Moonlight
• Flowing Rose Pink
• Glacier Grey Leather
• Stardust Blue
• Stardust Purple

Specifications

Specification	Details
Battery type	Built-in, rechargeable
Battery capacity	1800mAh
Output	Adjustable 5-30W
Charging	USB-C, up to 5V/3A
Display	0.98-inch HD colour screen
Activation	Inhale and button
Airflow	Adjustable side slider
Vaping style	MTL / RDL
Included pod capacity	2ml each
Included pod resistances	0.6Ω and 0.8Ω
Coil technology	Integrated UniTech 3.0 mesh
Filling method	Top-fill
Dimensions	124 × 27.4 × 17.6mm
Weight	Approximately 89g

What’s in the Box?

• 1 × OXVA XLIM Pro 4 device
• 1 × 0.6Ω XLIM ABT UniTech 3.0 2ml pod, pre-installed
• 1 × 0.8Ω XLIM ABT UniTech 3.0 2ml pod
• 1 × USB-C cable
• 1 × User manual
• 1 × Use suggestion card

Frequently Asked Questions

Does the XLIM Pro 4 work with XL ABT pods?

Yes. Our OXVA XLIM ABT XL Replacement Pods fit the Pro 4 and support its anti-burn function when enabled.

Can I use standard XLIM pods?

Yes. Compatible standard XLIM cartridges, including our OXVA XLIM UniTech 3.0 Replacement Pods, work normally. However, ABT anti-burn protection requires an XLIM ABT cartridge.

Does the XLIM Pro 4 need separate coils?

No. The supplied cartridges have integrated mesh coils. Replace the complete pod when its coil wears out.

Is the XLIM Pro 4 the same as the XLIM Pro 2 DNA?

No. The Pro 4’s ABT system detects e-liquid levels, while the Pro 2 DNA uses coil-temperature monitoring. They use different approaches to anti-burn protection.

Can anti-burn protection be switched off?

Yes. With an ABT cartridge fitted, eight consecutive button presses toggle ABT protection. When disabled, the device no longer provides ABT low-liquid protection.