Lost Vape UB MTL Replacement Coils
- Resistance
- 0.8Ω, 1.2Ω
- Coils in a pack
- Pack of 5
Voopoo PnP Replacement Coils are genuine push-fit coils designed for devices, pods and tanks built around Voopoo’s original PnP platform. Available in 17 coil options, the range covers mouth-to-lung, restricted direct-to-lung and direct-to-lung vaping at power levels from 10W to 80W.
The collection includes mesh, regular and ceramic coil options, allowing you to choose the resistance, wattage and draw that best suit your compatible Voopoo setup. Each coil uses a simple push-fit installation, so there is no threading or need for separate coil-building tools.
Supplied in packs of five, Voopoo PnP Replacement Coils are suitable for replacing worn coils or keeping spares ready for your everyday device.
Please note: original PnP coils are not compatible with the newer Voopoo PnP X platform. Check the name printed on your existing coil, pod or tank before ordering.

Voopoo PnP and PnP X are two separate coil platforms. Although both use a convenient push-fit installation, they have different fittings and are not interchangeable.
Use Voopoo PnP Replacement Coils if your device, pod or tank specifically states that it uses the original PnP platform. This includes many earlier Vinci, Drag, Argus, Navi and V-Series devices.
Use Voopoo PnP X Replacement Coils for newer devices built around the PnP X platform, including the Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Drag 5 and Drag 6.
The easiest way to check is to look at the code printed on your existing coil or consult the specifications for the pod or tank fitted to your device.

Original Voopoo PnP coils are used across a wide range of compatible Voopoo kits, pods and tanks. However, not every PnP coil is suitable for every device. Compatibility depends on the pod or tank fitted, the device’s supported resistance range and whether it can provide the coil’s recommended wattage.
Devices and tanks that use selected original PnP coils include:
Always check the coil code, resistance and recommended wattage against the specifications of your particular device, pod or tank before ordering.
Original PnP coils are not compatible with PnP X pods or tanks. Shop Voopoo PnP X Replacement Coils if your setup uses the newer platform.
| Coil | Resistance | Recommended Wattage | Vaping Style | Best For |
|---|---|---|---|---|
| PnP-VM6 | 0.15Ω | 60-80W | DTL | A warm, high-powered vape with maximum vapour production |
| PnP-TW15 | 0.15Ω | 55-70W | DTL | High-powered DTL vaping with a slightly lower maximum wattage |
| PnP-VM5 | 0.20Ω | 40-60W | DTL | Full DTL vaping with strong flavour and substantial vapour |
| PnP-TW20 | 0.20Ω | 40-55W | DTL | A balanced DTL draw for compatible Drag and Argus setups |
| PnP-VM1 | 0.30Ω | 32-40W | RDL / DTL | A restricted or lighter direct-to-lung vape |
| PnP-TW30 | 0.30Ω | 28-36W | RDL | A controlled restricted direct-to-lung draw at moderate wattage |
| PnP-M1 | 0.45Ω | 28-35W | RDL / DTL | A warmer, more open restricted direct-to-lung vape |
| PnP-VM3 | 0.45Ω | 25-35W | RDL | Balanced flavour and vapour with a restricted draw |
| PnP-VM4 | 0.60Ω | 20-28W | RDL / Loose MTL | A cooler vape with moderate vapour production |
| PnP-M2 | 0.60Ω | 20-25W | RDL | Lower-powered restricted direct-to-lung vaping |
| PnP-TM1 | 0.60Ω | 20-25W | MTL | A looser mouth-to-lung draw with 50/50 e-liquid or nic salts |
| PnP-DW60 | 0.60Ω | 18-23W | RDL / Loose MTL | A looser MTL or gentle RDL inhale |
| PnP-R1 | 0.80Ω | 12-18W | MTL | A tighter mouth-to-lung draw with 50/50 e-liquid |
| PnP-TM2 | 0.80Ω | 12-18W | MTL | A tight, lower-powered MTL vape using 50/50 e-liquid |
| PnP-R2 | 1.0Ω | 10-15W | MTL | Low-powered MTL vaping with a discreet amount of vapour |
| PnP-C1 | 1.20Ω | 10-15W | MTL | A tight MTL draw using a ceramic heating element |
| PnP-TR1 | 1.20Ω | 10-15W | MTL | A tight, low-powered MTL vape with 50/50 e-liquid or nic salts |
The final draw will also depend on the airflow setting and the pod or tank fitted to your device. Not every PnP coil is suitable for every original PnP device.
PnP-VM5 and PnP-VM6: Best suited to higher-VG e-liquids and low nicotine strengths. These coils operate at higher wattages and are designed for direct-to-lung vaping. Avoid using high-strength nic salts.
PnP-TW15, TW20 and TW30: Best paired with 50/50 e-liquids at lower nicotine strengths. Voopoo does not recommend high-VG e-liquids with the TW series because the smaller wicking openings may struggle with thicker vape juice.
PnP-VM1: Suitable for 50/50 or moderate-VG e-liquid at lower nicotine strengths, providing an RDL or lighter DTL vape.
0.45Ω-0.60Ω coils: Generally suited to 50/50 or moderate-VG e-liquids. Selected options work well with lower-strength nic salts, while others provide a more open RDL draw. Check the wattage and vaping style of the individual coil before selecting your nicotine strength.
PnP-R1, PnP-TM2, PnP-R2, PnP-C1 and PnP-TR1: Best paired with 50/50 e-liquids, including nic salts and standard freebase vape juice. These higher-resistance coils operate at lower wattages and are intended primarily for mouth-to-lung vaping.
As a general guide, lower-resistance coils operate at higher wattages and produce more vapour. However, e-liquid suitability also depends on the coil design, so resistance alone should not be used to choose the VG/PG ratio.
Before installing a new coil, apply a few drops of e-liquid directly to the visible cotton openings.
Push the coil firmly into the base of your compatible pod or tank, fill it with e-liquid and leave it standing for approximately 5-10 minutes. This allows the cotton to become fully saturated and helps prevent a dry or burnt hit when the coil is first used.
Begin at the lower end of the coil’s recommended wattage range and gradually increase the power until you reach your preferred flavour and vapour level.
Coil lifespan varies depending on the wattage, e-liquid, vaping frequency and how well the coil is primed.
Sweetened and dessert-style e-liquids can leave more residue on the heating element and may shorten coil life. Running a coil at a higher-than-recommended wattage or allowing the pod or tank to run low on e-liquid can also cause premature burning.
Replace the coil when:
5 x Voopoo PnP Replacement Coils in your selected option
Which devices use Voopoo PnP coils?
Original Voopoo PnP coils are compatible with a wide range of Vinci, Drag, Argus, Navi and V-Series devices, as well as PnP pods and tanks. Compatibility depends on the particular pod or tank fitted, and not every device supports every PnP coil option. Always check your device specifications before ordering.
Are Voopoo PnP coils compatible with PnP X devices?
No. Original PnP coils and newer PnP X coils have different fittings and are not interchangeable. Devices such as the Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Drag 5 and Drag 6 use the newer PnP X platform.
Which Voopoo PnP coil is best for nic salts?
The PnP-R1, PnP-TM2, PnP-R2, PnP-C1 and PnP-TR1 coils are among the most suitable options for nic salts and 50/50 e-liquids. Selected 0.45Ω and 0.60Ω coils can also be used with lower-strength nic salts, depending on the device, wattage and vaping style. Avoid high-strength nic salts with low-resistance DTL coils.
Which Voopoo PnP coil produces the most vapour?
The PnP-VM6 0.15Ω coil operates at 60-80W and produces the most vapour among the options listed. It is intended for DTL vaping with a compatible high-powered device and higher-VG e-liquid.
How long should I leave a new PnP coil to soak?
After filling your pod or tank, leave a new PnP coil to soak for approximately 5-10 minutes. Applying a few drops of e-liquid to the visible cotton before installation can also help prevent a burnt taste.
How many Voopoo PnP coils are included?
Each pack contains five genuine Voopoo PnP replacement coils in your selected option.
| Resistance | 0.15Ω, 0.2Ω, 0.3Ω, 0.45Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω |
|---|---|
| Coil type | Mesh, Regular |
| Coils in a pack | Pack of 5 |
| Wattage range | 10 to 80W |
| Vaping style | MTL, RDL, DTL |
Bought: PnP-TW15 0.15
Great coil great for flavour
Excellent service.
Voopoo insulted themselves by producing the pnp RBA coil that comes with a tiny tiny screw driver and a 0.6 ohm pre-built spaced coil and some nasty cheap cotton.You literally need a magnifying glass to do it. No instructions at all. It is ridiculous! It is not possible to get acceptable flavor out of it. You will be waisting your good juice trying to get it right. I rebuilt mine 100 times in 2 days, wicking it differently, twisting the coil like this and then like that.... wais of money, time and good juice!
These coils are great . Last a couple of weeks each and great smooth vape
Vm6 coils have not let me down at all. Got a good 100ml out of one and it still didn't give up. I vape around 46-50w all day long. I still recommend these over the tpp coils for how long they last.
Voopoo vm5 and vm6 and vm1 coils used in the drag s and x. These coils work extremely well and I find you don't necessarily need the high end rating on these coils to achieve fantastic flavour and vape production. I've been using them all now for around a week and the flavour is still as good as when I first installed them. Slowly ramping up the coils as normal for any coil. All in all fantastic coils for a extremely well performing device.
Love these coils and great for using with the drag x PNP tank aswell as any other voopoo pod system that uses PNP coils. The vm4 coils produce great clouds and flavour and suprsingly handle both nic salt eliquids (10mg) and standard nic eliquids (70/30 3mg normal nicotine). so far I've had 5 days out of my 1st vm4 coil refilling 4-5 times a day and I've had no leaking or burning whatsoever. Highly recommend these coils. The service received from legion of vapers is excellent with fast delivery and dispatch. Cannot recommend the company enough as they are excellent and the prices are also very hard to beat.
Ask about this product and we'll email you the answer. Answers that may help others are shown here, without your name or email address.
| RM 24 Tracked1-3 days | £3.99, free from £40.00 |
|---|---|
| RM Special Next Day DeliveryOrders before 2pm Mon-Fri. Delivery Monday to Saturday | £8.99 |
| DPD UK 1-2 WORKING DAY | £3.99, free from £40.00 |
| DPD UK Saturday DeliveryOrders before 2pm Mon-Fri | From £11.99 |
Order by 3:30pm for same-day dispatch, Monday to Friday