Legion Of Vapers
Voopoo

Voopoo PnP X Replacement Coils

Now£10.99 Was£14.99 Save 27%
In stock · Order now for dispatch tomorrow
Coil Type
1
  • Free Mainland UK delivery over £40.00
  • Order by 3:30pm for same-day dispatch
  • TPD compliant stock
  • 30-day returns

Product information

Description

Voopoo PnP X Replacement Coils

Voopoo PnP X Replacement Coils are genuine push-fit mesh coils designed for Voopoo devices, pods and tanks built around the newer PnP X platform. Available in six resistance options from 0.15Ω to 0.80Ω, the range covers mouth-to-lung, restricted direct-to-lung and direct-to-lung vaping.

Each PnP X coil uses Voopoo’s mesh heating structure and thermo-stable cotton to deliver even heating, reliable e-liquid absorption and consistent flavour. A patented four-layer leak-resistant design separates the airway, heating zone and air cavity to help reduce condensation and leaking during everyday use.

Supplied in packs of five, these coils offer a simple push-fit installation without threading or the need for separate coil-building tools.

Please note: PnP X coils are not compatible with the original Voopoo PnP coil platform. Check your device, pod or tank before ordering.

Voopoo PnP X Replacement Coils Promo

Do I Need PnP or PnP X Coils?

Voopoo PnP and PnP X are two separate coil platforms. Although both use a convenient push-fit installation, they have different fittings and are not interchangeable.

Use Voopoo PnP X coils when your device, cartridge or tank specifically states that it uses the PnP X platform.

Use the original Voopoo PnP Replacement Coils for earlier PnP devices such as the Voopoo Drag X, Drag S, Vinci, and Vinci X, or for any device fitted with an original PnP pod or tank.

The easiest way to check is to look at the name printed on your existing coil, pod packaging or device user manual before placing your order.

Voopoo PnP X Replacement Coils Promo 2

Voopoo PnP X Coil Compatibility

Voopoo PnP X coils are compatible with a growing range of Voopoo kits, cartridges and tanks, including:

They are also used by selected newer Voopoo devices built around the PnP X platform.

Compatibility can depend on the particular pod, cartridge or tank fitted to your device. Although the products listed use the PnP X platform, not every resistance is appropriate for every device and pod configuration. Always check the supported resistance and wattage range for your particular setup before ordering.

PnP X coils are not compatible with original PnP pods or older devices such as the Drag X, Drag S, Vinci and Vinci X. Shop Voopoo PnP Replacement Coils if your device uses the original PnP platform.

Voopoo PnP X Replacement Coils Promo 3

Voopoo PnP X Replacement Coil Features

  • Genuine Voopoo replacement coils
  • Mesh heating structure for even heating
  • Thermo-stable cotton for consistent e-liquid delivery
  • Four-layer leak-resistant construction
  • Push-fit installation
  • Suitable for MTL, RDL and DTL vaping
  • Six resistance options available
  • Supplied in a pack of five

Which PnP X Coil Should I Choose?

Resistance Recommended Wattage Vaping Style Best For
0.15Ω 60-80W DTL A warm, high-powered vape with maximum vapour production
0.20Ω 40-60W DTL Direct-to-lung vaping at a slightly lower wattage with substantial vapour
0.30Ω 32-40W DTL / RDL A balanced RDL or lighter direct-to-lung draw with strong flavour
0.45Ω 25-32W RDL A cooler, more controlled restricted direct-to-lung vape
0.60Ω 18-23W MTL / RDL Lower-powered RDL vaping or a looser mouth-to-lung inhale
0.80Ω 12-16W MTL A tighter mouth-to-lung draw at lower wattages

Voopoo PnP X Replacement Coils Promo 4

Recommended E-Liquids

0.15Ω and 0.20Ω coils: Best suited to higher-VG e-liquids and low nicotine strengths. These coils operate at higher wattages and are designed for direct-to-lung vaping. Avoid using high-strength nic salts with these options.

0.30Ω and 0.45Ω coils: Suitable for 50/50 or higher-VG e-liquids, depending on the device and airflow settings. Lower nicotine strengths are generally recommended because these coils produce more vapour than an MTL coil.

0.60Ω and 0.80Ω coils: Best paired with 50/50 e-liquids, including nic salts and standard freebase vape juice. Their lower operating wattages make them better suited to MTL and restricted RDL vaping.

As a general guide, lower-resistance coils operate at higher wattages and produce more vapour. Higher-resistance coils use less power and are better suited to 50/50 e-liquid and nic salts.

How to Prime a Voopoo PnP X Coil

Before installing a new coil, apply a few drops of e-liquid directly to the visible cotton openings.

Push the coil firmly into the base of your compatible pod or tank, fill it with e-liquid and leave it standing for approximately 5-10 minutes. This gives the cotton time to become fully saturated and helps prevent a dry or burnt hit when the coil is first used.

Begin at the lower end of the recommended wattage range and gradually increase the power until you reach your preferred flavour and vapour level.

How Long Do PnP X Coils Last?

PnP X coil lifespan varies depending on the wattage, e-liquid, vaping frequency and how well the coil is primed.

Sweetened and dessert-style e-liquids can leave more residue on the mesh and may shorten coil life. Running the coil at a higher-than-recommended wattage or allowing the pod to run low on e-liquid can also cause premature burning.

Replace the coil when:

  • Flavour becomes noticeably weaker
  • Vapour production decreases
  • The e-liquid develops a burnt or unpleasant taste
  • The coil begins producing a persistent gurgling or flooded draw
  • The cotton appears heavily darkened, or the coil no longer performs properly within its recommended wattage range

What’s in the Box?

5 x Voopoo PnP X Replacement Coils in your selected resistance

Frequently Asked Questions

Which devices use Voopoo PnP X coils?


PnP X coils are used by Voopoo devices, pods and tanks built around the PnP X platform, including the Drag X2, Drag S2, Drag X3, Drag S3, Argus Pro 2, Drag 5, Drag 6, PnP X Pod Tank and Uforce-X Tank. Compatibility and suitable resistance options can depend on the pod or tank fitted, so always check your device specifications before ordering.

Are PnP X coils compatible with original PnP devices?


No. PnP X coils and original PnP coils have different fittings and are not interchangeable. Earlier devices such as the Drag X, Drag S, Vinci and Vinci X generally use original Voopoo PnP coils.

Which PnP X coil is best for nic salts?


The 0.60Ω and 0.80Ω PnP X coils are the most suitable options for nic salts and 50/50 e-liquids. They operate at lower wattages and provide an MTL or restricted RDL inhale. High-strength nic salts should not normally be used with the lower-resistance 0.15Ω and 0.20Ω DTL coils.

Which PnP X coil produces the most vapour?


The 0.15Ω coil operates at 60-80W and produces the most vapour in this range. It is intended for direct-to-lung vaping with a compatible high-powered device and higher-VG e-liquid.

How long should I leave a new PnP X coil to soak?


After filling your pod or tank, leave a new PnP X coil to soak for approximately 5-10 minutes. Priming the visible cotton with a few drops of e-liquid beforehand can also help prevent a burnt taste.

How many Voopoo PnP X coils are included?


Each pack contains five genuine Voopoo PnP X replacement coils in your selected resistance.