BP MODS Pioneer Insider Boro RBA

BP MODS Pioneer Insider Boro RBA has finally arrived at LOV. After a number of requests from fellow vapers we could not ignore this anymore and decided to get them at the best price for both our old and new vapers. Without you there is no LOV and therefore we couldn’t say no!

The BP MODS Pioneer Insider MTL/DL Boro is designed especially for the Billet Box Style Boro Mod. The Insider is a rebuildable atomiser compatible with box mods that can accept the R4 Boro. Composed of a PCTG tank with an XL capacity, it has a post parallel plate that can accommodate a single coil resistance. On the front of the tank, a silicone tab allows the tank to be filled in addition to a versatile airflow system.

The Pioneer Insider is designed for a Mouth To Lung to Restricted Direct Lung vaping experience. In order to be able to refine its draw BP Mods have chosen airflow pins to be placed directly in the center of the deck. A total of 7 configurations are available ranging from 1mm opening to 3.5mm. In addition, the Pioneer Insider comes with a silicone seal fitted with an absorbent cotton pad to be placed under the tank in order to absorb any traces of condensation under the atomiser.

BP MODS Pioneer Insider Boro RBA Features

Compatible with all Billet Box style boro mods.
Super useful anti-condensate airflow passage.
6ml PCTG clear tank.
Super easy to build and use as an RBA boro.
0.8/1.0/1.2/1.5/2.0/2.5/3.0/3.5mm airflow pins to fit MTL/RDL/DL, all included in the original package.
Two sets of chimney adapters to fit the Pioneer Insider tank and the original BB tank.
Flavour close to Pioneer RTA and even performs better.
Maybe the most affordable BB boro on earth!

It comes with

Full Set Pioneer Insider (with 0.8mm Airflow Pin)
Chimney Adapter for Standard Boro Tank
510 Adapter
Single Wire#1 Coil, 0.7ohm (Ni70 26 Ga, Diameter 2.5mm)
Clapton #3 Coil, 0.35ohm (A1 26Ga x 2 + Ni80 40Ga, 42.5mm)
Compressed Cotton Pieces
VMQ Airflow Passage
M2.5 x 2.5 x 0.45 Post Screws
PEEK Airflow Pin Insulator
VMQ 23.8 x 14.1 x 2.05 Gasket
VMQ 11.5 x 1mm O-Rings, VMQ 11.5 x 1.5mm O-Rings, VMQ 6 x 1mm O-Rings
Airflow Pins (1.0 / 1.2 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5mm with 8 x 1mm O-Rings

Frequently Asked Questions

What mods is the BP Mods Pioneer insider Boro RBA compatible with?

This unique RBA is compatible with the following:

• Billet Box
• Bantam B Delro
• Zero Boro
• Abyss
• Supbox
• Stashbox
• ey Mod
• ZETT Box