BP MODS Futon Ohm Tab Basic Edition
BP MODS Futon Ohm Tab Basic Edition is a lower priced ohm tab compared to the luxury edition.
The Futon Ohm Tab is a V/W (variable wattage) adjustable coil tab which will bring you a brand new experience that you’ve never found on any other coil tabs machine. The Futon Ohm Tab has a side fire button which is pleasing to press with your left index finger. Mode select button, +/- buttons, screen and the 510 port are on the top and an 1A current input type-C USB interface is on one side.
The ‘back trunk’ is also available on this basic edition, so same as the luxury edition, it’s not just a coil tab, but also a tool kit and an 18650 charger.
BP MODS Futon Ohm Tab Basic Edition Features
Volts burning mode
Output: 0.8~8W (50W max. power)
Press increment: 0.1V
Better for burning DL coils
Watts Burning Mode
Output: 3~50W
Press increment: 0.5W
Better for burning MTL coils
Ohm Reading Mode
Leading Range: 0.01~9.99ohm
Error Range: 0.01ohm
BP MODS Futon Ohm Tab Basic Edition Parameters
USB input: 1A
Single High-Amp 18650 Battery (Not Included)
Aluminium Alloy Chassis
Side Fire Button
Display Screen
Mode Select Button
Two Adjustment Buttons
Storage Compartment
Bottom 3M Rubber Pads
Threaded 510 Connection
Doubles as Battery Charger
It comes with
x1 BP Mods Futon Ohm Tab
Frequently Asked Question
What battery can I use to power the Ohm Tab?
The BP Mods Futon is compatible with any 18650 batteries. We recommend the Molicel P26A Battery for its longevity and high quality standard.
Who are BP Mods?
BP Mods are the sister brand for Dovpo. BP Mods have produced pretty much every piece of vaping equipment you can think of from Cotton to RTA’s and Mods. Known for their attention to detail we at LOV are proud to be stocking their hardware.
Dory –
How did I ever manage without this. This is the best ohm reader tab I’ve ever used or owned. I’ve had the tabs from well know brands over the years but they were pants.
This also has the added bonus of being able to change the wattage for dry burning your coils, which means you can dry burn even your MTL coils on this without the risk of screwing them up with too much heat.
If your a builder don’t hesitate and get yourself one of these , you won’t regret it.
As for LOV, well what can I say, they were as brilliant as always.
P S. (verified owner) –
Very nice looking and useful ohm reader. But it does appear off by 0.2 ohms?? I’ve tested against many mods. And always reads 0.2 off..
Don’t know if this is a fault in my particular ohm reader. Or if they are set this way. Bit disappointing. As it’s such a nice bit of kit.
I’ll just have to remember EVERY reading is NOT TRUE!!
Jeff Douglas (verified owner) –
Excellent build tab.