Vaperz Cloud Handmade Coils

Vaperz Cloud Handmade Coils are premium pre-built Alien coils designed for use with selected Vaperz Cloud rebuildable atomisers. Available in six coil sets – Valhalla, Valkyrie, Asgard, Asgard Mini, Valhalla Mini, and Sith – each option is built around the dimensions and build deck of its corresponding Vaperz Cloud RDA, RTA, or RSA.

Each pack contains a pair of handmade coils, with resistance options ranging from 0.10Ω to 0.59Ω depending on the set. The range includes Triple Core and Quad Core Alien builds using Nichrome 80 or Nichrome 90 wire.

Choose the coil set that matches your Vaperz Cloud atomiser and always check the resistance and recommended configuration before installation.

Which Vaperz Cloud Handmade Coil Should I Choose?

Each Vaperz Cloud coil set is designed for a specific rebuildable atomiser. Use the table below to compare the available options before choosing your coils.

Please note: The stated resistance relates to the intended configuration for each coil set. The Sith set is designed for single-coil use, while the other options are intended for the configurations specified for their respective Vaperz Cloud atomisers.

Vaperz Cloud Handmade Coils Features

Valhalla Coil Set

The Valhalla Coil Set is designed for the 40mm Valhalla V2 RDA. This Triple Core Alien pair has a combined resistance of 0.30Ω, with a 4mm inner diameter and Nichrome 80 construction. A leg length of approximately 6.5mm is recommended for positioning the coils in the Valhalla V2 RDA.

• Triple Core Alien Coil Set
• 0.30 Ohm Resistance
• 3×28/36
• 4mm Inner Diameter
• Wire Composition – Nichrome 80

Valkyrie Coil Set

The Valkyrie Coil Set is designed for the 30mm Valkyrie RTA. This Quad Core Alien pair has a combined resistance of 0.12Ω, a 3mm inner diameter and Nichrome 80 construction. A leg length of approximately 5mm is recommended for positioning in the Valkyrie RTA.

• 4 Core Alien Coil Set
• 0.12 Ohm Resistance
• 4×28/36
• 3mm Inner Diameter
• Wire Composition – Nichrome 80

Asgard Coil Set

The Asgard Coil Set is designed for the 30mm Asgard RDA. These Quad Core Alien coils have a combined resistance of 0.34Ω, with a 3.5mm inner diameter and Nichrome 80 construction. A leg length of approximately 5.5mm is recommended for positioning in the Asgard RDA.

• Quad Core Alien Coil Set
• 0.34 Ohm Resistance
• 4×28/36
• 3.5mm Inner Diameter
• Wire Composition – Nichrome 80

Asgard Mini Coil Set

The Asgard Mini Coil Set is designed for the 25mm Asgard Mini RDA. This Quad Core Alien pair has a combined resistance of 0.10Ω, with a 3mm inner diameter and Nichrome 80 construction. A leg length of approximately 5mm is recommended for positioning in the Asgard Mini RDA.

• Quad Core Alien Coil Set
• 0.10 Ohm Resistance
• 4×27/36
• 3mm Inner Diameter
• Wire Composition – Nichrome 80

Valhalla Mini Coil Set

The Valhalla Mini Coil Set is designed for the 30mm Valhalla V2 Mini RDA. This Quad Core Alien pair has a combined resistance of 0.10Ω, with a 3.5mm inner diameter and Nichrome 90 construction. A leg length of approximately 5mm is recommended for positioning in the Valhalla V2 Mini RDA.

• 4 Core Alien Coil Set
• 0.10 Ohm Resistance
• 4×28/36
• 3.5mm Inner Diameter
• Wire Composition – Nichrome 90

Sith Coil Set

The Sith Coil Set is designed for the 24mm Sith RSA. Unlike the other dual-coil options in this range, the Sith is designed to run as a single-coil build at approximately 0.59Ω. Each pair uses a Triple Core Alien construction with a 3mm inner diameter and Nichrome 80 wire. Vaperz Cloud recommends a leg length of approximately 6mm for positioning in the Sith RSA.

• Three Core Alien Coil Pair
• 0.59 Ohm Resistance Single Coil
• 3×30/38
• 3mm Inner Diameter
• Wire Composition – Nichrome 80

Important Rebuildable Coil Information

Vaperz Cloud Handmade Coils are intended for experienced users of rebuildable atomisers. Before installation, make sure you understand Ohm’s Law, battery safety, and your device’s capabilities.

Always check your build resistance before use, and ensure your batteries and device are suitable for the resistance and intended power level. Actual resistance can vary slightly depending on installation, leg length and configuration.

It comes with

1 Pair of Vaperz Cloud Handmade Coils