San Dynasty Pro Pod Kit by Orca Vape

The San Dynasty Pro Pod Kit by Orca Vape, created in collaboration with Gerobak Vapor, combines adjustable performance with a compact CNC-machined aluminium alloy body. Powered by an included replaceable 1500mAh INR 16500 battery, it delivers up to 30W and features intelligent pod recognition, manual wattage adjustment, inhale activation and adjustable airflow. The kit includes 0.6Ω and 0.8Ω refillable mesh pods for both mouth-to-lung and restricted direct-lung vaping. A 0.42-inch TFT colour screen clearly displays your settings, while compatibility with the wider San Dynasty pod range makes replacement straightforward.

Premium Aluminium Alloy Construction

The San Dynasty Pro is manufactured from CNC-machined aluminium alloy, giving it a solid metallic finish while remaining compact enough for everyday use.

Measuring 82.5 × 37.7 × 19mm, it offers the control of a more advanced vape device without the bulk of a traditional box mod.

A removable anodised aluminium 510 drip tip completes the design and can be exchanged for another compatible 510 mouthpiece when required.

Replaceable 1500mAh 16500 Battery

Unlike pod kits with permanently installed batteries, the San Dynasty Pro uses a removable INR 16500 rechargeable battery.

One 1500mAh 16500 high-drain battery is included with the kit, so you do not need to purchase a separate cell before getting started. The battery can be recharged inside the device through its USB-C port at up to 5V/2A or exchanged for a suitably rated spare.

This replaceable design allows you to carry a charged backup and replace an ageing battery without replacing the entire pod kit.

Shop IMORE 16500 High-Drain Batteries

Shop the San Dynasty Pro Dual 16500 Battery Charger

Please note that the San Dynasty Pro requires a 16500 battery. The smaller 14500 batteries used by the original San Dynasty Pod Kit are not compatible.

Adjustable Power up to 30W

The San Dynasty Pro provides adjustable output up to 30W, allowing you to control the warmth and vapour production within the recommended range of the installed pod.

Intelligent resistance detection recognises the fitted pod and automatically selects a suitable power level. You can then adjust the wattage manually to fine-tune the vape to your preference.

This combination makes the device straightforward to set up while retaining the control experienced vapers expect.

0.42-Inch TFT Colour Screen

The built-in 0.42-inch TFT colour screen presents the main device information in a clear, compact format.

The display shows:

• Remaining battery level
• Selected wattage
• Pod resistance
• Puff count

This makes it easy to check the device status and selected output without navigating complicated menus.

San Dynasty Refillable Mesh Pods

The kit includes two 2ml refillable San Dynasty pods with integrated mesh coils.

The wider San Dynasty pod range also includes a 0.4Ω mesh option rated for 25–30W, providing a warmer and more open restricted direct-lung vape.

Each pod contains a built-in mesh coil, so there is no separate coil to remove or install. Simply refill the pod until flavour or vapour production begins to decline, then replace the complete cartridge.

The San Dynasty Pro is compatible with San Dynasty Replacement Pods in 0.4Ω, 0.6Ω and 0.8Ω resistances.

Adjustable MTL and RDL Airflow

An adjustable airflow slider allows you to tighten or loosen the inhale to suit the installed pod and your preferred vaping style.

Reduce the airflow with the 0.8Ω pod for a tighter cigarette-style mouth-to-lung draw. Open it further with the 0.6Ω or 0.4Ω pod for an airier restricted direct-lung inhale.

The San Dynasty Pro is inhale activated, meaning you can vape simply by drawing through the mouthpiece without holding a firing button.

Which E-Liquid Should You Use?

The San Dynasty Pro works best with e-liquids that can wick efficiently through its compact integrated mesh coils.

We recommend using:

• 50VG/50PG e-liquid
• Nicotine salt e-liquid
• Standard freebase 50/50 e-liquid

The 0.8Ω pod is particularly well suited to nicotine salts and lower-powered MTL vaping. The 0.6Ω pod delivers a warmer vape with slightly greater vapour production.

Thicker high-VG shortfills may not wick as efficiently in these pods, particularly during frequent use.

San Dynasty Pro vs Original San Dynasty

The San Dynasty Pro is a more powerful and premium version of the original device, with a larger battery format and greater control over the output.

The San Dynasty Pro is the stronger choice for users who want a larger removable battery, adjustable power and an aluminium alloy body.

The original San Dynasty Pod Kit by Orca Vape remains a simpler option for users who prefer automatic power adjustment and the smaller 14500 battery format.

San Dynasty Pro Colours

Features

Specifications

What’s in the Box?

• 1 × San Dynasty Pro device
• 1 × 0.6Ω refillable mesh pod
• 1 × 0.8Ω refillable mesh pod
• 1 × 1500mAh INR 16500 high-drain battery
• 1 × anodised aluminium 510 drip tip
• 1 × user manual

Who Is the San Dynasty Pro For?

The San Dynasty Pro is designed for vapers who want the portability of a refillable pod system with the added flexibility of adjustable wattage and a replaceable battery.

It is particularly suitable for:

• MTL vapers using nicotine salts or 50/50 e-liquid
• RDL vapers looking for a warmer and airier draw
• Users upgrading from a basic fixed-output pod kit
• Existing San Dynasty users wanting greater battery capacity
• Vapers who prefer replaceable batteries
• Users who want adjustable power without carrying a bulky device

Explore more products from Orca Vape, or add spare batteries and the dedicated charger to complete your setup.

The San Dynasty Pro Pod Kit by Orca Vape delivers a compact balance of adjustable 30W power, replaceable battery convenience and flexible MTL or RDL performance.

Frequently Asked Questions