Shop for the latest & greatest Coils by Scott Products from Legion Of Vapers.
Coils By Scott is the UK’s longest-running manufacturer of handmade pre-built vape coils, and the range stocked here covers everything from tight 1.20 ohm MTL singles through to 0.09 ohm Fralien builds for mechanical mods. Every coil leaves the workshop wound from high-grade wire and put through ultrasonic cleaning, which strips out any production residue so the first vape is clean and the flavour is present from the start. The brand has won the ECigClick Best Handmade Coil Brand award three times. That is not marketing copy, that is the wider vaping community voting with their opinions. We stock the full range here, all sourced through authorised UK distributors.
Consistency is the thing that separates Coils By Scott from most alternatives. Mass-produced factory coils vary batch to batch, which means the resistance you read on your mod today might not match the coil you install next week. Every Coils By Scott coil is wound by hand, checked, and cleaned via ultrasonic process before it is packaged. The result is a coil that reads where it should, fires evenly, and delivers the same flavour character every time.
The ultrasonic cleaning stage is worth understanding properly. It removes flux, debris, and any residue left over from the winding process. Without it, that material burns off during your first few vapes and contaminates the flavour. With it, the first pull tastes the same as the tenth.
Three ECigClick awards in the same category is not luck. It reflects what happens when vapers run these coils back to back against the competition and report back honestly.
Coils By Scott Fused Clapton Coils
Fused Claptons are the most accessible entry point in the Coils By Scott range and the most versatile. A parallel core wire is wrapped with a thinner outer wire, which increases surface area significantly over a plain round wire coil. More surface area means more contact with your e-liquid, and in practice that means noticeably better flavour.
Resistances run from 0.15 ohm for sub-ohm dual builds up to 0.72 ohm and 1.20 ohm for single-coil MTL setups. The 0.72 ohm single is a solid starting point for anyone moving from a pod kit to a rebuildable. The 0.40 ohm single sits comfortably in RDL territory at 25-40W and is a good all-rounder if you want more flavour than a standard coil head without going full sub-ohm.
Coils By Scott Alien Clapton Coils
Alien Claptons build on the Fused Clapton structure. The outer wrap is de-cored and re-wound around a multi-strand core, which creates the distinctive ridged texture and pushes surface area beyond what a standard Clapton achieves. That extra contact area translates to denser vapour and more flavour intensity, particularly at lower resistances.
The 0.14 ohm Alien Clapton is built for high-wattage regulated mods and mechanical mods, where ramp-up is fast and cloud output is the priority. For vapers who want that Alien Clapton flavour character in a more controlled setup, single-coil options at 0.40 ohm and 0.63 ohm bring the same construction into an RDL-friendly resistance range.
Coils By Scott Framed Staple Coils
Framed Staple coils are a more complex build. Stacked ribbon wire is framed by round wire and fused together with a finer outer wrap, producing a very high surface area coil in a compact footprint. That combination makes them popular with vapers chasing maximum cloud output on dual-coil RDAs.
The 0.10 ohm Framed Staple comes as a pair with 5 wraps per coil. These are not beginner coils. You will need a regulated mod capable of sustained output above 60W, and wicking needs to be done carefully to keep up with the coil’s capacity. Get it right and the flavour is exceptional.
Coils By Scott Fralien Coils
The Fralien combines the stacked ribbon structure of a Framed Staple with the textured outer wrap of an Alien Clapton. At 0.09 ohm, it sits at the very bottom of the resistance range and is built specifically for high-wattage and mechanical mod use.
Surface area is exceptional, flavour is dense, and cloud output is serious. These suit experienced builders who are comfortable running below 0.10 ohm and understand how to verify their build is safe before firing. If that is you, the Fralien is the most capable coil in the range.
Coils By Scott Boro Coils
The dedicated boro range is purpose-built for the growing number of vapers running AIO-style mods, squonk setups, and boro box mods. Standard dual-coil RDA coils are often too large for a boro deck without trimming and adapting. The Coils By Scott boro range removes that problem entirely.
These come in 2-core and 3-core configurations across resistances from 0.25 ohm to 0.45 ohm. The N80 wire variants ramp up quickly and hold temperature consistently, which suits the regulated mods most boro vapers run day to day. If your setup is boro-based, these are the coils to reach for first.
With hundreds of verified reviews and a loyal UK customer base, Legion of Vapers is a vape shop people come back to.
Shop vape kits, pods, coils, tanks, mods, shortfills, nic salts and accessories, all in one place.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive in 1 to 2 working days.
Need help choosing a kit, matching coils, or picking the right liquid for your style? Message us. You’ll get proper advice from a UK-based team.
We have run a lot of handmade coils through our own setups, and Coils By Scott is the range we come back to. The resistance reads accurately, there are no hot spots from uneven winding, and the flavour from a fresh Alien Clapton or Framed Staple is noticeably richer than what you get from a standard factory coil head.
The handwound process is visible in the result. Each coil looks identical to the last, which tells you the build is consistent. That matters when you are firing at 80W and need to know your coil will behave predictably.
For vapers who have moved on from stock coils and want more from their rebuildable, this is the range we point them towards first.
The right coil depends on four things: your device, your preferred draw, your wattage range, and how much vapour production you want. Here is a straight breakdown by setup type.
Single-coil Fused Claptons at 0.72 ohm or 1.20 ohm are built for MTL RTAs. They produce a tight, controlled draw with minimal cloud, which suits nic salts and higher-strength e-liquids well. The 1.20 ohm option in particular is close to the pod kit experience, making it a good bridge for anyone moving from a closed pod system to a rebuildable. Browse our MTL coils range to compare options alongside these.
Restricted direct-to-lung sits comfortably in the 0.35-0.63 ohm range. Single Alien Claptons at 0.40-0.63 ohm and the 2-core boro aliens at 0.33-0.35 ohm are the sweet spot. Expect good flavour with moderate cloud output at 25-45W. This is a versatile range that covers most everyday vaping scenarios without demanding high wattage from your mod.
The 0.14-0.15 ohm Alien Claptons and Fused Claptons are built for sub-ohm tanks and open-deck RDAs. You will want a regulated mod comfortable firing at 60-100W. These are dual-coil builds: each individual coil in the pair reads higher, and the combined resistance drops when both are installed. Our guide to sub-ohm vaping covers everything you need before you build.
The 0.09 ohm Fralien and 0.10 ohm Framed Staple are the obvious choices for mech use, but you must check Ohm’s Law against your battery’s continuous discharge rating before you fire anything below 0.15 ohm. Our Ohm’s Law guide covers exactly what you need to calculate and why it matters.
The dedicated boro range covers 0.25-0.45 ohm in 2-core and 3-core configurations, wound to fit compact boro decks without any trimming. N80 variants ramp up quickly, which suits the regulated mods most boro vapers run. If you are new to this style of setup, our boro tank guide is a useful starting point before you buy.
A single-coil Fused Clapton at 0.40 ohm is the most forgiving entry point in the Coils By Scott range for anyone making this step. The surface area is lower than the Alien variants, which makes wicking less demanding, and the resistance sits comfortably within the output range of most standard regulated mods. Our beginner’s guide to vape coils and how to build vape coils guide are both worth reading before your first install.
Every Coils By Scott coil we sell comes through authorised UK distributors only. You are getting the genuine product, not a substitute or a grey import. With handmade coils, the quality is entirely in the production process, and that guarantee only holds with authentic stock.
Prices are kept competitive across the full range, with multi-buy options available where the brand offers them. If you go through coils regularly, check our clearance section and current offers for the best value on stock we are moving quickly.
Orders go out fast from our UK warehouse. Free delivery is available above our standard threshold, so picking up a few packs at once usually means shipping costs nothing extra.
Everyone on our team vapes. We have run rebuildable setups, burned through wick, and made the mistakes worth making before recommending anything to a customer. If you are not sure which coil suits your hardware, get in touch and we will give you a straight answer. That is genuinely how we work.
Explore our answers to some frequently asked questions.
A Fused Clapton wraps a thin wire around a parallel core. An Alien Clapton de-cores that outer wrap and re-winds it around a multi-strand core, creating more texture and greater surface area. In practical terms, Alien Claptons produce denser vapour at equivalent resistance and suit vapers who want more flavour intensity or cloud output.
The single-coil Fused Claptons at 0.72 ohm and 1.20 ohm are purpose-built for MTL setups. They produce a tight, controlled draw with minimal vapour, which suits nic salts and higher-nicotine e-liquids. The 1.20 ohm option is the closest to a pod kit experience you will get from a rebuildable.
The range covers Kanthal, Nichrome, and N80. Kanthal is reliable and durable but not compatible with temperature control. N80 (Nichrome 80) ramps up faster and runs slightly cooler, making it popular for boro setups. For temperature control compatibility, look for SS316L options. Our temperature control guide has the full breakdown.
Yes, but you must verify the numbers before you fire. Check your battery’s continuous discharge rating against the coil resistance using Ohm’s Law. The 0.09 ohm Fralien and 0.10 ohm Framed Staple are the most common mech mod choices in the range. Use our Ohm’s Law guide to run the calculation.
Each coil is wound individually by hand, checked for consistency, and cleaned via ultrasonic process before packaging. Factory coils are stamped out at volume with less quality control per unit. The difference shows in flavour density and firing consistency. Running a rebuildable also means the cost per coil is significantly lower than replacing a factory coil head every one to two weeks.
Fit the coil to your build deck and position it centrally in the airflow. Pulse it gently to check for hot spots and confirm it glows evenly from the centre outward. Wick with your preferred cotton, fluff the ends, tuck them into the juice ports, and prime with a few drops of e-liquid before your first fire. Our how to prime a vape coil guide covers every step in detail.
Category
Flavours
Strength
Size
Flavours
Brand
Multibuy Offers
