SMOK RPM40 Kit UK
SMOK RPM40 Kit
The SMOK RPM40 is not just a pod-style device, due to its various features and specifications, its minute size and portability, and its ability to behave more like box a mod, it has earned its reputation of being an all-rounder and provides the best, most premium experiences of both worlds to vape lovers everywhere. Good things really do come in small packages after all!
With a large 1500mAh built-in battery that can power the device up to 40W and an internal IQ-R chip that flourishes a ridiculously impressive coil activation and firing time of just 0.001 seconds, it’s fair to say that this pocket vape undoubtedly has some significant strength behind it.
The designers of this device have made sure that your safety is top priority, and has built in numerous protective features to ensure that you are kept as safe as possible when you are enjoying your vape. With an intelligent atomiser recognition, a puff monitoring system, an 8 second cut-off, short circuit protection, overheating protection and an extremely useful low battery warning, it’s fair to say that in terms of security, the RPM40 certainly does it all, all of which are presented clearly and concisely via the device’s 0.96 inch TFT colour screen.
Your device comes fit and ready with two pods fitted with pre-installed coils – an RPM Standard pod of 4.3ml with an RPM mesh 0.4 ohm coil and an RPM Nord pod of 4.5ml with a Nord DC 0.6ohm coil, but it can also be used with SMOK Nord coils or the any other SMOK RPM coils, meaning that you can vape mouth-to-lung with MTL coils or in a direct-to-lung way (DTL) depending on your preferences.
The SMOK RPM40 pods feature a wider mouthpiece than most other pods, and combined with their fully adjustable, balanced draw and airflow help to create more vapour when you crank up your wattage levels.
All in all, combining the vapour production of a mod with the usability of a pod system, it’s no surprise that the RPM40 has rapidly become a fan favourite. Get yours today!
25mm x 25mm x 99mm
5ml (Empty pod) / 4.3ml (Standard Pod) / 4.5ml (Nord Pod)
Modern, sleek and stylish appearance, with a smooth surface and glossy finish
Extremely portable and easy to transport due to the device’s small dimensions
Internal 1500mAh battery providing a maximum output of 40W of power, allowing for up to a day of vaping time each charge
Wider mouthpiece for the purpose of extended inhalation
Virtually instant coil activation – drastically reduces firing time to just 0.001 seconds as a result of the device’s built-in IQ-R chip
Drip tip much like those of a classic box mod, allowing you to enjoy the steam process to its full extent, as well as much more flavour and vapour
Easily readable, owing to the device’s 0.96 inch TFT screen
Supports both mouth-to-lung (MTL) and direct-to-lung (DTL) vaping styles
Easily chargeable, taking as little as two hours to reach full battery
Multiple coil options allowing you to use various RPM pods
Large e-liquid capacity of 5ml
Multiple protective features (eg. 8-second cut-off, short circuit protection and low voltage) in order to provide a safer vaping experience
- Smok RPM40 Device (1500mAh)
- RPM Standard Pod (RPM Mesh 0.4ohm Coil Preinstalled) (4.3ml)
- RPM Nord Pod (Nord DC 0.6ohm Coil Preinstalled) (4.5ml)
- USB Cable
- User Manual
SMOK RPM40 Review Video
Frequently Asked Questions
How do you refill Smok RPM40?
Without doubt, it could not be easier to fill and replace the e-liquid in your device. Simply remove the pod from your device by lightly pulling it out of position, pull out the rubber plug on the slot and add liquid through the slot until the pod is filled. After this, all you have to do is firmly but carefully position the rubber plug back in place ensuring that no e-liquid has spilled out, place the pod back onto the end of your device, and let it stand for two to three minutes to allow the wick’s cotton to get entirely saturated. After this, you are ready to use your vape once more!
How do you replace a Smok RPM40 coil?
Replacing a coil in your Smok RPM40 device really is indeed as easy as it sounds. As you would if you were refilling the device, you will need to remove the plug-in pod, but this time, you will need to unscrew the coil that you are currently using from the opposite end of the pod to the mouthpiece. After that, simply insert your new coil of choice, push the pod back into place, and restart your device.
Specification: SMOK RPM40 Kit UK
2 reviews for SMOK RPM40 Kit UK