Shop for the latest & greatest Kendo Products from Legion Of Vapers.
Kendo is a specialist vape accessories brand built around the DIY and rebuildable side of vaping. If you’re searching for Kendo products, you’re most likely after their Kagayaki coil wire or vape cotton, both of which have earned a solid reputation among builders who care about consistency and clean flavour. Through our own use across RDAs, RTAs and MTL rebuildable systems, we’ve found the wire measures true to spec, the cotton breaks in fast, and the flavour stays clean from the first pull. The brand covers the essentials: coil wire in multiple alloys and gauges, pre-made coils, and cotton in formats that suit different build styles and tank sizes. At Legion of Vapers, we stock a genuine, UK-supplied Kendo range so you can build with confidence.
Kendo’s reputation comes down to two things that matter most to serious builders: material quality and batch-to-batch consistency. When you’re dialling in a specific resistance target or wicking an RTA for the hundredth time, you need to trust your materials. Kendo gives you that.
Generic accessory brands come and go, but Kendo has stayed relevant because the products perform consistently in real use, not just on spec sheets.
Kendo Coil Wire
Kendo’s coil wire covers the key alloys used across most build styles. Kanthal A1 is the straightforward choice for wattage mode builds, offering stability at higher temperatures and a forgiving experience for builders of any level. Ni80 (Nichrome 80) ramps up faster than Kanthal at the same gauge, which suits vapers who prefer a snappier, more responsive vape. 316L stainless steel works in both wattage and temperature control mode, giving TC users a reliable option.
Wire is available in multiple gauges, typically from 24AWG through to 28AWG. That range gives builders the flexibility to construct single-strand, twisted and clapton-style coils. Resistance is consistent spool to spool, which is exactly what you need when you’re targeting a specific ohm value.
Kendo Vape Cotton
Kagayaki cotton is the product that put Kendo on the map. It’s a Japanese organic cotton processed to remove the impurities that cause the unpleasant off-flavours you sometimes get when wicking a fresh build. We’ve used it across mesh-style builds and traditional round-wire coils, and in our experience it delivers clean flavour from the first pull without needing the extended dry-burn break-in that some cottons require.
It wicks efficiently without over-packing, which means good juice flow without the risk of flooding your deck. If you’re switching from a cheaper cotton and wondering why your builds taste flat or grassy early on, Kagayaki is likely the upgrade you need.
Kendo Pre-Built Coils
Not every vaper wants to spend time winding coils from scratch, and Kendo’s pre-built options are a solid answer to that. They come in consistent resistances, ready to install in your RDA. You still need to wick them, but you skip the wire-winding process entirely. For RDA users who want the flavour and airflow benefits of a rebuildable without the build time, these are worth keeping in stock.
Kendo Accessories
Kendo’s accessory range covers the supporting items that round out a build kit: replacement parts, additional cotton packs and coil-related consumables. Useful to have on hand if you vape hard through coils or run multiple builds at once. Keeping a few spares means you’re never stuck waiting on a delivery before you can rewick.
With hundreds of verified reviews and a loyal UK customer base, Legion of Vapers is a vape shop people come back to.
Shop vape kits, pods, coils, tanks, mods, shortfills, nic salts and accessories, all in one place.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive in 1 to 2 working days.
Need help choosing a kit, matching coils, or picking the right liquid for your style? Message us. You’ll get proper advice from a UK-based team.
We stock Kendo because it holds up under real use. Their wire measures true to spec, the cotton doesn’t need babying to taste clean, and the materials perform across a wide range of wattages and build styles. That’s not marketing – that’s what we’ve found after running Kendo cotton and wire through our own setups over time.
If you’re putting time into building your own coils, Kendo is a brand worth building with.
The right Kendo product depends on how you build, what device you’re running, and how much time you want to spend on setup. Here’s a straightforward breakdown by vaping style and experience level.
Start with Kendo’s pre-built coils for your RDA and pair them with Kagayaki cotton. Pre-builts remove the wire-winding step entirely, so you can focus on learning to wick correctly without also troubleshooting coil consistency. Once you’re comfortable wicking, move to Kendo’s single-strand Kanthal A1. It’s the most forgiving alloy for new builders, stable at a range of wattages and easy to work with. Take a look at our beginner’s guide to vaping if you’re still finding your feet.
If you’re already building regularly and want more control over ramp-up speed and temperature behaviour, Kendo’s Ni80 and 316L stainless steel wire are worth exploring. Ni80 heats faster than Kanthal at the same gauge, which suits lower-wattage builds where you want a snappier response. Stainless steel works in both wattage and temperature control mode, making it a versatile pick for vapers who switch between both. Our guide to building vape coils covers the practical side of working with different wire alloys.
MTL rebuildable tanks work best with higher resistance coils, typically in the 0.8Ω to 1.5Ω range. For this style, thinner gauge Kanthal (26AWG to 28AWG) gives you the tighter coil builds needed to hit those resistances. Wick Kendo cotton lightly in MTL setups to avoid restricting juice flow through narrower wicking ports. Too much cotton in a tight MTL port is a common mistake that leads to dry hits. Check our MTL vape tanks guide for more on pairing coil builds with the right hardware.
Sub-ohm builds using lower gauge wire (24AWG, 22AWG) produce the low resistance and high surface area needed for direct-to-lung vaping. Kendo’s heavier gauge Kanthal and Ni80 options suit this style well. Pair them with Kagayaki cotton packed generously enough for high VG e-liquids to pull through without causing dry hits. See our sub-ohm vaping guide for more detail on power ranges and coil pairing.
If you’ve been running a commercial sub-ohm tank with replacement coils and want to try rebuilding for the first time, Kendo’s pre-built coils are a practical bridge. They work in many RDAs without any wire winding, so you get a feel for wicking and deck maintenance before committing to building from raw wire. Our RDA, RTA and RDTA guide is a good starting point for understanding which rebuildable style suits your setup.
Every Kendo product we sell comes through authorised UK distributors only. That means you’re getting genuine materials: wire that measures to spec and cotton processed correctly for vaping use. Counterfeit coil wire is a real concern in the accessories market, and buying from an authorised UK retailer removes that risk entirely. What you order is what the brand actually made.
We price Kendo accessories competitively and run regular multi-buy deals on coil wire and cotton, so stocking up costs less than buying pack by pack. Browse our accessories category for current offers.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive within one to two working days, so you won’t be waiting long to get your next build started. Free delivery is available on qualifying orders.
Our team are experienced vapers who build their own coils and use the products we sell. Not sure which wire gauge to use for a specific resistance target, or how much cotton to pack into a particular tank? Message us. You’ll get a straight answer from someone who’s actually done the build, not a scripted response.
Explore our answers to some frequently asked questions.
Kendo is best known for Kagayaki Japanese organic cotton and their coil wire range. Both are well-regarded in the DIY and rebuildable vaping community for batch-to-batch consistency and clean flavour. The cotton in particular has earned a loyal following among builders who want fast wicking without a lengthy break-in period.
Yes. Kagayaki cotton wicks quickly and doesn’t require an extended break-in to taste clean, which makes it forgiving for newer builders still learning how to wick correctly. It’s one less variable to worry about when you’re getting to grips with the process.
Use Kendo 316L stainless steel for temperature control mode. Kanthal A1 and Ni80 are resistance wire alloys and do not respond to TC chipsets. Stainless steel is also compatible with standard wattage mode, so it’s a versatile option if you switch between both.
Ni80 (Nichrome 80) has lower resistance per metre than Kanthal at the same gauge, which means faster ramp-up and a slightly warmer vape at equivalent wattage. Kanthal is more stable at high temperatures and easier to work with for beginners. Most experienced builders keep both on hand depending on the build style.
High VG liquids (70VG and above) are thicker and wick more slowly. Wick loosely enough that the cotton makes full contact with the coil without packing so tightly that liquid can’t pull through. Fluffy, relaxed wicking suits high VG far better than dense packing and reduces the risk of dry hits.
Kendo wire and cotton are universal materials that work with any rebuildable atomiser using standard round-wire coil builds. Compatibility depends on your build deck size and the resistance range your mod supports, not the brand of wire or cotton you’re using.
Category
Flavours
Strength
Size
Flavours
Brand
Multibuy Offers
