Shop for the latest & greatest Yachtvape Products from Legion Of Vapers.
Yachtvape launched in 2019 with a single focus: build rebuildable atomisers that serious vapers actually want to use. No pod kits, no disposables, no trying to be everything to everyone. Everything in the Yachtvape range is designed for vapers who want full control over their build, their airflow and their flavour. Their core lineup covers RDAs and RTAs, with each product engineered around a specific vaping style \- tight MTL draws on the Pandora RTA, wide-open DTL builds on the Claymore RDA, or the single-coil flavour focus of the Eclipse RTA. Through our time with the range, we’ve found the build decks are consistently well thought-out: postless designs that accept both clockwise and counterclockwise coil orientations, and airflow systems that deliver concentrated, focused flavour rather than diffuse vapour. The Eclipse RTA was co-developed with Mike Vapes, which gives the product development real-world community credibility. Every Yachtvape product we sell is sourced through authorised UK distributors.
Yachtvape built its reputation in the rebuildable community by doing one thing well: producing precisely engineered atomisers that perform exactly as intended, rebuild after rebuild. Their postless deck designs, deep honeycomb intake structures and Pyrex glass construction reflect a brand that understands what experienced vapers actually need from a daily driver.
Every design decision, from deck layout to airflow geometry, serves one outcome: a better, more consistent vape. That focus is exactly why Yachtvape has earned a firm place in the rebuildable community.
Yachtvape RTAs
Yachtvape’s RTAs are built for vapers who want tank convenience without giving up the control of a rebuildable. The Eclipse RTA is a 24mm single-coil design co-developed with Mike Vapes, featuring a 4-slot postless deck, hidden horizontal hex socket screws and a deep honeycomb airflow intake. It holds 2ml with the straight glass or 3.5ml with the included bubble glass, both TPD-compliant options for UK vapers.
The Pandora MTL RTA goes the other direction, offering over 30 airflow combinations to fine-tune the draw from a tight cigarette-style pull to a more open restricted MTL. If you’re building your first RTA, the Pandora’s adjustability makes it a strong starting point. We’ve run the Eclipse on a 0.3Ω Kanthal round wire build at around 35-45W and the flavour is genuinely impressive for the size. The short wicking tunnel feeds juice quickly, which cuts dry hits significantly compared to some wider-deck designs.
Yachtvape RDAs
The Claymore RDA is Yachtvape’s open-build dripping atomiser, designed for vapers who want maximum vapour and flavour from a direct-to-lung setup. RDAs require you to drip e-liquid directly onto your cotton rather than relying on a tank, which means more involvement but often better flavour intensity.
The Claymore’s build deck follows the same postless philosophy as the Eclipse, giving you flexibility with coil placement and orientation. If you’re comfortable rebuilding and want a compact, high-performing dripper, this is worth serious consideration. Check out our RDA, RTA and RDTA guide if you want a clear breakdown of the differences before committing.
Yachtvape Accessories and Spare Parts
Yachtvape includes solid accessory packs in the box with their atomisers. Prebuilt coils, spare glass, driptip adapters and coil lead guides are standard across the range. We also carry individual spare parts where available, including replacement glass for the Eclipse RTA in both 2ml and 3.5ml configurations.
If you snap a glass or need a replacement o-ring, check our accessories and replacement parts section to find what you need.
With hundreds of verified reviews and a loyal UK customer base, Legion of Vapers is a vape shop people come back to.
Shop vape kits, pods, coils, tanks, mods, shortfills, nic salts and accessories, all in one place.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive in 1 to 2 working days.
Need help choosing a kit, matching coils, or picking the right liquid for your style? Message us. You’ll get proper advice from a UK-based team.
We don’t stock every brand that comes through the door. Yachtvape earned its place in our range because the products do what they claim. The build decks are genuinely accessible for someone entering the rebuildable world, the airflow on both the Eclipse and Pandora delivers consistent, flavour-focused performance, and the stainless steel and Pyrex construction holds up through regular rebuilds without degrading.
Yachtvape is a focused brand. They build rebuildable atomisers and they build them well, that’s the whole point.
The right Yachtvape product depends on your build experience, the type of draw you prefer and whether you want a tank setup or are happy dripping. Here’s how to work it out.
The Pandora MTL RTA is the most approachable starting point in the Yachtvape range. Its 30-plus airflow combinations let you dial in your draw gradually, and MTL setups generally run at lower wattage (10-20W is typical), which means less heat and less margin for error while you’re learning.
You’ll need basic Kanthal wire and some quality vape cotton before you get started. Our guide to building vape coils covers exactly what you need to pick up and how to use it.
If you already know your way around a build deck and want a refined MTL setup, the Pandora MTL RTA gives you the precision to tailor airflow to your exact preference. Run a higher-resistance coil in the 0.8Ω to 1.2Ω range with a 50/50 or higher-PG e-liquid for a sharp, throat-focused draw.
The level of adjustability on the Pandora is genuinely useful here, not just a spec-sheet talking point. Our best MTL vape tanks guide is worth a read if you’re comparing options before committing.
The Eclipse RTA is built for vapers who want strong flavour from a compact, discreet tank. It’s a single-coil design, which keeps power requirements modest (30-50W covers most builds) and makes it genuinely portable. The top-fill and hidden hex screws make rebuilding fast and tidy.
A 0.3Ω Kanthal A1 round wire is a reliable starting build if you’re not sure where to begin. The prebuilt 0.3Ω coil included in the box also gives you a ready-to-go option before you build your own.
The Claymore RDA is for vapers comfortable with the dripping process who want a high-output, flavour-dense vape. DTL setups typically run lower resistance coils under 0.5Ω at higher wattage, so plan for 60W and above depending on your build. You’ll need a squonk mod or to drip manually.
Our sub-ohm vaping guide explains the basics if you’re making the move from tank to dripper and want to know what you’re getting into first.
Every Yachtvape product we sell is sourced exclusively through authorised UK distributors. That means you’re getting the real thing with correct UK documentation, TPD-compliant packaging and proper warranty support, not grey imports with no comeback if something goes wrong.
We keep our Yachtvape pricing competitive and run regular deals across the range. Check our clearance section for discounted stock and multi-buy options when they’re available.
Orders are dispatched quickly from the UK, with free delivery available above our standard threshold. No waiting weeks for international shipping, your kit arrives fast and you can get building.
Our team are everyday vapers who use rebuildable atomisers. We’ve built coils on postless decks, dealt with wicking issues and burned through cotton faster than we’d like to admit. If you have questions about which Yachtvape atomiser suits your setup, or need help troubleshooting a build, we’ll give you a straight answer, not a scripted response. Get in touch and talk to someone who actually vapes.
Explore our answers to some frequently asked questions.
Not for brand-new vapers. The Pandora MTL RTA is one of the more accessible rebuildable options for someone ready to move on from pre-built coils, but you’ll need basic coil building knowledge before you start. If you’re completely new to rebuildables, our coil building guide is a good place to begin.
The Claymore is an open-build dripping atomiser – you drip e-liquid directly onto the cotton, there’s no tank. The Eclipse is an RTA with a 2ml or 3.5ml tank. If you want convenience with your rebuild, choose the Eclipse. If you want maximum flavour intensity and don’t mind dripping, the Claymore is the better fit.
The Pandora MTL RTA, without question. It offers over 30 airflow combinations, so you can fine-tune draw tightness to match exactly what you want from a mouth-to-lung setup. Run a 0.8Ω to 1.2Ω coil with a higher-PG e-liquid for the sharpest, most cigarette-like draw.
A 0.3Ω Kanthal round wire build at 35-45W is a reliable, flavour-forward starting point. The Eclipse also comes with a prebuilt 0.3Ω coil in the box, so you have a ready-to-go option straight away before building your own.
For the Eclipse RTA running at sub-ohm wattage, a 70VG/30PG blend or higher-VG liquid works well. For the Pandora MTL RTA at lower wattage and higher resistance, a 50/50 or higher-PG liquid gives better wicking and a sharper throat hit.
Yes. UK TPD limits e-liquid tanks to 2ml capacity. Yachtvape’s UK-supplied atomisers come with 2ml capacity glass as standard, making them fully TPD-compliant. Larger bubble glass is included as an option for nicotine-free use where the 2ml restriction does not apply.
Category
Flavours
Strength
Size
Flavours
Brand
Multibuy Offers
