SMOK Morph 3 Mod

SMOK Morph 3 Mod

SMOK Morph 3 Mod is the next release from the Morph line up by SMOK. A follow up from it’s little brother the Morph 2 this device is not to be taken lightly.

The SMOK Morph 3 Mod is powered by dual 18650 batteries that create a maximum of 230W output for overall performance. It can be bundled with a T-Air sub-ohm tank should you wish or you can also fit another tank up to 33mm without overhanging the top of the mod. This size gives you some serious options or what tank to place top.

Decorated with a 0.96-inch screen, the Morph 3 offers VW/TC modes for satisfactory vaping time and is constructed from zinc alloy and leather.

The SMOK Morph 3 mod features multiple output modes. Variable Wattage can be used to increase or decrease the power level to match your tank’s requirements and create more or less vapour. Temperature Control helps to unlock the flavour of your chosen e-liquid by heating coils consistently at a specified temperature.

The menu and settings are displayed on the colour screen on the front of the device, and it can easily be navigated using the buttons.

SMOK Morph 3 Mod Features

Mod Size: 46*33.8*88mm
Output Mode: VW/TC
Power Range: 5W-230W(VW), 10W-230W(TC)
Standby Current: ＜150uA
Input Voltage: 6.4V-8.4V
Output Voltage: 1.0V-8.2V
Charging Voltage: 5V±0.2V
Charging Current: Max 2.0A
Battery: Dual 18650 batteries (not included)
Resistance Range: 0.1ohm-2.5ohm(VW), 0.05ohm-2.0ohm(TC)
Temperature Range: 200F-600F/100C-315C

It comes with

SMOK MORPH 3 Mod
1pc Type-C Cable
User Manual

Frequently Asked Questions

What batteries are compatible with the SMOK Morph 3 Mod?

The SMOK Morph 3 Mod is a dual 18650 battery mod. Meaning it is compatible with 18650 batteries. This device is not compatible with 20700 or 21700 batteries. As always, the Molicel P28A Battery Pair is the perfect companion for this mod.

Can I charge this device using the USB Cable supplied?

Long and short of an answer is no. Please do not charge your mod via the USB port. These ports are primarily for software updates and not to be utilised for charging. All external battery mods should have their batteries charged via an external charger. This is much safer and allows your batteries to have a longer life span as it is regulated.

We have seen more and more cases where vapers using the USB ports for charging have fried the motherboards in the devices making them non existent. Please note that any charging via the USB port will invalidate the warranty on any external battery mod we sell.

Please invest in a relatively cheap external battery charger to ensure you vape safely and responsibly.