Shop for the latest & greatest Republic of Vape Products from Legion Of Vapers.
Republic Of Vape is a precision rebuildable brand built around designer collaboration and tight engineering, producing atomisers for vapers who want full control over their setup. Products like the Stalk RDA and SLMCDZ RTA are crafted for builders who drip or tank and want hardware that responds to fine-tuning. Whether you’re dialling back airflow for a tighter, flavour-forward RDL draw or opening things up for a loose DTL session, these atomisers deliver. Through our own testing, we’ve found Republic Of Vape hardware consistently punches above its price point for single coil flavour. We stock the full authentic range sourced exclusively through authorised UK distributors, so what arrives at your door is the real thing.
Original price was: £38.99.£31.99Current price is: £31.99.
Republic Of Vape has built its reputation among the rebuildable community by pairing designer collaboration with genuinely precise engineering. Their atomisers use postless deck designs that make coil installation cleaner and less fiddly than traditional post-and-hole setups, combined with dual-channel airflow systems that give you real tuning range rather than the illusion of it. Collaborations with respected names from the global builder community, including designers like Davi Arzika and Mike Vapeshouse, mean these are not just generic rebuildables dressed up with a logo.
Key reasons the brand carries weight in enthusiast circles:
What sets Republic Of Vape apart is the combination of designer credibility and accessible engineering. These are serious rebuildables that do not require a degree in coil building to get solid results from.
Republic Of Vape RTAs
Republic Of Vape RTAs are built for single coil builders who prioritise flavour above everything else. The SLMCDZ RTA runs a postless deck that accepts most premade and handmade coil builds across a typical resistance range of 0.3Ω to 1.0Ω, paired with a dual airflow system that shifts cleanly between RDL and DTL depending on how far you open the external ring. Top-fill design keeps refilling fast and leak-free.
Republic Of Vape RDAs
Republic Of Vape RDAs, including the Stalk series, are designed for builders who drip and want tight, direct coil airflow for concentrated flavour. The deck geometry seats coils accurately so your airflow hits exactly where it should. If you’re moving into rebuildables for the first time and want something that rewards careful building, the RDA range is worth serious consideration.
Republic Of Vape Accessories and Spare Parts
Spare glass, o-rings, replacement screws and additional drip tips are available for Republic Of Vape atomisers, so you can keep your setup running without replacing the whole unit. Picking up spares at the same time as your atomiser is always a smart move. Browse our vape accessories and replacement parts for compatible options.
With hundreds of verified reviews and a loyal UK customer base, Legion of Vapers is a vape shop people come back to.
Shop vape kits, pods, coils, tanks, mods, shortfills, nic salts and accessories, all in one place.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive in 1 to 2 working days.
Need help choosing a kit, matching coils, or picking the right liquid for your style? Message us. You’ll get proper advice from a UK-based team.
We stock Republic Of Vape because they make rebuildables that actually deliver on their engineering claims. Through our own testing, their dual airflow systems give you genuine tuning range and their postless decks make single coil builds far less fiddly than comparable atomisers in the same price bracket.
Here’s what makes them stand out day to day:
Serious builders return to Republic Of Vape because the engineering is honest and the results are consistent.
The right Republic Of Vape atomiser depends on whether you drip or tank, your preferred airflow style, your coil building experience and the e-liquid viscosity you typically run. Here’s a quick guide to help you choose.
The SLMCDZ RTA is a reasonable starting point if you’re new to building coils. The postless deck removes one of the most common frustrations with rebuildables: threading wire through post holes. Slide your coil legs into the clamps, tighten, wick with your preferred cotton, and you’re ready to go. Pair it with a regulated mod that displays wattage and resistance clearly, and run a 70VG/30PG e-liquid to keep wicking clean. Our beginner’s guide to vape coils and how to build vape coils guide are both worth reading before your first build.
If you already build regularly and want an RTA that rewards fine-tuning, Republic Of Vape’s dual airflow system is where these devices earn their reputation. Run a fused clapton or alien coil in the 0.3Ω to 0.5Ω range, open the inner airflow for direct coil contact, and adjust the outer ring until the draw feels exactly right. High VG e-liquids (80VG/20PG and above) work well here for cloud density without losing flavour definition.
The SLMCDZ includes a dedicated RDL drip tip and inner airflow lock, so you can set a restricted draw, lock it in and vape consistently without the ring shifting mid-session. This suits vapers who like the feel of a tighter draw but want tank capacity rather than dripping every few puffs.
Open the external airflow ring fully, swap to the wider 510 drip tip and run a lower resistance build for more vapour volume. Republic Of Vape RTAs are compact at 22mm, but the direct coil airflow path keeps flavour present even with the draw fully opened up.
If you prefer the intensity of dripping over tank convenience, the Republic Of Vape RDA range is the right call. Dripping gives you fresher, more saturated flavour hits on every puff and suits builders who like to swap e-liquids regularly without cleaning out a full tank. See our RDA, RTA and RDTA guide if you’re deciding between formats.
Republic Of Vape atomisers are a strong step up from sub-ohm tanks for vapers who want more flavour control and lower running costs. The coil building learning curve is real, but the payoff in flavour accuracy and cost per week is significant. Check our guide to sub-ohm vaping for a solid reference point before making the switch.
Every Republic Of Vape product we sell is sourced through authorised UK distributors only. In the rebuildable market, counterfeit hardware is a genuine problem: fake decks, poor threading and substandard materials can ruin a build and, more seriously, create safety risks. When you buy from us, you get the real thing, with accurate specs, correct tolerances and manufacturer-spec components throughout.
Pricing across the Republic Of Vape range is kept competitive, and we regularly run multi-buy offers on accessories and spare parts so you can stock up on o-rings, glass and drip tips without paying over the odds. Check our clearance section for discounted hardware if you want to stretch your budget further.
Order before 3:30pm Monday to Friday and we dispatch the same day. Most UK orders arrive within one to two working days, so you’re not waiting around when you want to get a new build up and running. Free delivery thresholds are listed at checkout.
Our team are active vapers who build their own coils and use the hardware we sell. If you need help matching a Republic Of Vape atomiser to your mod, choosing the right coil wire or working out which cotton suits your wicking style, message us. You’ll get a straight answer from someone who has actually done it, not someone reading from a script.
Explore our answers to some frequently asked questions.
Republic Of Vape hardware is aimed at intermediate to advanced vapers who build their own coils. Their RTAs and RDAs require basic coil building knowledge, though the postless deck design on the SLMCDZ RTA makes the process more accessible than many comparable atomisers at a similar price point.
Premade round wire, fused claptons and simple alien builds all seat well in the postless deck. For flavour, a single fused clapton in the 0.3Ω to 0.5Ω range is a solid starting point. Avoid complex multi-core builds in the 22mm format as clearance can be tight.
A 70VG/30PG blend works well for most builds. High VG liquids (80VG/20PG and above) are fine if you wick generously and leave enough channel space in your cotton. Thin 50/50 liquids can flood the deck if your wick is too loose, so err on the side of a snug fit.
The inner airflow ring controls direct coil airflow for concentrated flavour at coil level. The outer ring adjusts overall draw resistance from restricted RDL to open DTL. An inner lock keeps your preferred settings in place once you’ve found the draw that works for you. Our mouth to lung vs direct to lung guide explains the difference if you’re still working out your preference.
Yes. The SLMCDZ RTA uses a standard 510 drip tip connection, so you can swap in any 510-compatible tip from your existing collection or pick up alternatives from our accessories range.
The upfront cost is higher and there’s a learning curve, but running costs drop significantly once you’re buying wire and cotton rather than replacement coils. A spool of Kanthal A1 and a pack of quality cotton will outlast dozens of pre-built coils at a fraction of the price. Our can vaping save you money guide has a fuller breakdown.
Category
Flavours
Strength
Size
Flavours
Brand
Multibuy Offers
