Teslacigs Punk II 220W Box Mod

Teslacigs Punk II 220W Box Mod is back with a bang. A truly stunning regulated box mod with some real weight and attractive engraving patterns has once again entered the market. This mod was originally released a few years ago and now Teslacigs has decoded to release this again to a select few.

At LOV we are proud to be stocking the Punk II (2) Box Mod once again but are sure this wont last for long! Don’t waste your time pondering on whether to purchase this device or not- it is worthy as an addition to your collection and one that you will come back to time and time again!

The Punk box by Teslacigs is back! The Punk II 220W Box Mod is an electronic mod which functions with 2 x 18650 batteries that need to be purchased separately. It can be associated with several atomiser options be it sub ohm tanks or RDA’s that are 24 mm in diameter maximum. This new “Pro” version is equipped with the famous Punk Mod Hyber 2.0 chipset that is reliable and stable.

The box mod assures a maximum output power of 220 watts. It proposes 2 setting buttons with a 0.96-inch coloured screen, vape in VW, temperature control and bypass.

Another newness of the Punk II 220 W box is that there is the presence of the ON/OFF button at the top of the mod.

Teslacigs Punk II 220W Box Mod Settings Parameters

• BP Mode (BYPASS): make the most of all the benefits of a mechanical mod, with the added benefit of electronic safety, in this mode both output power and voltage cannot be changed
• Ni/Ti/SS Mode: this mode lets you adjust the power according to the type of coil used in your atomiser
• KANT Mode: adjust the power from 7 to 220W and choose among 3 speeds of heating (Soft, Normal, Hard)
• Auto Mode: the Hyber 2.0 chipset will automatically adjust the settings according to the type of coil installed in your atomiser
• TEMP: set the temperature according to the type of wire used in your build (rebuildable)

Teslacigs Punk II 220W Box Mod Parameters

Diameter: 23mm
Maximum power: 220w
Battery type: 18650 x2
Height: 88mm
Material: Zinc and ABS alloy
Width: 25.5mm
Depth: 55mm
Mod type: Box
Batteries included: No
Weight: 270g
Mod type: Electronic
USB charging: Yes
Chipset: Hyber 2.0
Chipset version: Tesla
Compatible coils: 0.1 to 3 Ohms
Temperature control: Yes (Ni200 – Titanium – SS316)
Connector pin: 510
Configuration: Temperature Control / Variable Wattage

It comes with

Teslacigs Punk II 220W Box Mod
1pc USB cable
User Manual

Frequently Asked Questions

What batteries are compatible with the Teslacigs Punk II 220W Box Mod?

This box mod is compatible with dual 18650 batteries. We sell all of our batteries in pairs and as always would recommend the Molicel P28A Battery Pair due to the longevity and quality when used correctly.

Can I charge the Teslacigs Punk II 220W Box Mod via the USB port?

Put simply no! USB ports are primarily for software updates and not charging external batteries. From experience, what tends to happen if you charge this way is that the motherboard ends up getting fried as the current is not being regulated correctly. Please look after your device and use an external battery charger. For a small investment you will ensure the life of your mods!

Please note that any charging via port claims are no longer being accepted for warranty claims.

Are there any reviews available on the Teslacigs Punk II 220W Box Mod before I commit to a purchase?

There absolutely bundles of reviews on the older version of this mod which was super sexy and flashy to say the least. Surprisingly, no one has decided to review this beauty. This is a matter of time only…

What colours are available in the Teslacigs Punk II 220W Box Mod?

At present we are stocking five colours of this device as follows:

• Matte Black (Black)
• Matte Antique Brass (Antique Brass)
• Matte Antique Copper (Antique Copper)
• Matte Stainless Steel (Stainless Steel)
• Matte Gunmetal (Gunmetal)